Cisco Catalyst 3560-X Series, Руководство по настройке программного обеспечения

Страница: 1457 / 1538

1-35
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
Appendix 1 Working with the Cisco IOS File System, Configuration Files, and Software Images
Working with Software Images
The archive upload-sw command builds an image file on the server by uploading these files in order:
info, the Cisco IOS image, and the web management files. After these files are uploaded, the upload
algorithm creates the file format.
Caution
For the download and upload algorithms to operate properly, do not rename image names.
Copying Image Files By Using RCP
You can download a switch image from an RCP server or upload the image from the switch to an RCP
server.
You download a switch image file from a server to upgrade the switch software. You can overwrite the
current image with the new one or keep the current image after a download.
You upload a switch image file to a server for backup purposes. You can use this uploaded image for
future downloads to the same switch or another of the same type.
Note Instead of using the copy privileged EXEC command or the archive tar privileged EXEC command, we
recommend using the archive download-sw and archive upload-sw privileged EXEC commands to
download and upload software image files. For switch stacks, the archive download-sw and archive
upload-sw privileged EXEC commands can only be used through the stack master. Software images
downloaded to the stack master are automatically downloaded to the rest of the stack members.
To upgrade a switch with an incompatible software image, use the archive copy-sw privileged EXEC
command to copy the software image from an existing stack member to the incompatible switch. That
switch automatically reloads and joins the stack as a fully functioning member.
These sections contain this configuration information:
•
Preparing to Download or Upload an Image File By Using RCP, page 1-36
• Downloading an Image File By Using RCP, page 1-37
•
Uploading an Image File By Using RCP, page 1-38
Step 6
end Return to privileged EXEC mode.
Step 7
archive upload-sw
ftp:
[[ // [ username [ : password ] @ ] location ] / directory ] /
image-name .tar .
Upload the currently running switch image to the FTP server.
•
For // username : password , specify the username and
password. These must be associated with an account on
the FTP server. For more information, see the
“Preparing
to Download or Upload an Image File By Using FTP”
section on page 1-31
.
• For @ location , specify the IP address of the FTP server.
•
For / directory / image-name .tar , specify the directory
and the name of the software image to be uploaded.
Directory and image names are case sensitive. The
image-name .tar is the name of the software image to be
stored on the server.
Command Purpose