Cisco Catalyst 2960 Series, Руководство по настройке

Страница: 861 / 2288

The protocol provides authentication between the switch and the daemon, and it
ensures confidentiality because all protocol exchanges between the switch and the daemon are
encrypted.
Operation
When a user attempts a simple ASCII login by authenticating to a switch using , this process occurs:
1 When the connection is established, the switch contacts the daemon to obtain a username
prompt to show to the user. The user enters a username, and the switch then contacts the
daemon to obtain a password prompt. The switch displays the password prompt to the user, the user enters
a password, and the password is then sent to the daemon.
allows a dialog between the daemon and the user until the daemon receives enough information
to authenticate the user. The daemon prompts for a username and password combination, but can include
other items, such as the user
’ s mother ’ s maiden name.
2 The switch eventually receives one of these responses from the daemon:
•
ACCEPT
—
The user is authenticated and service can begin. If the switch is configured to require
authorization, authorization begins at this time.
• REJECT — The user is not authenticated. The user can be denied access or is prompted to retry the
login sequence, depending on the daemon.
• ERROR — An error occurred at some time during authentication with the daemon or in the network
connection between the daemon and the switch. If an ERROR response is received, the switch
typically tries to use an alternative method for authenticating the user.
•
CONTINUE
—
The user is prompted for additional authentication information.
After authentication, the user undergoes an additional authorization phase if authorization has been enabled
on the switch. Users must first successfully complete authentication before proceeding to
authorization.
3
If authorization is required, the daemon is again contacted, and it returns an
ACCEPT or REJECT authorization response. If an ACCEPT response is returned, the response contains
data in the form of attributes that direct the EXEC or NETWORK session for that user and the services
that the user can access:
• Telnet, Secure Shell (SSH), rlogin, or privileged EXEC services
• Connection parameters, including the host or client IP address, access list, and user timeouts
Method List
A method list defines the sequence and methods to be used to authenticate, to authorize, or to keep accounts
on a user. You can use method lists to designate one or more security protocols to be used, thus ensuring a
backup system if the initial method fails. The software uses the first method listed to authenticate, to authorize,
or to keep accounts on users; if that method does not respond, the software selects the next method in the list.
This process continues until there is successful communication with a listed method or the method list is
exhausted.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
779
Information About