Cisco Catalyst 2960 Series, Руководство по настройке

Страница: 2088 / 2288

Number of times that a syslog message matches the
pattern specified by this syslog event specification
since event registration. match_count
Number of times that this syslog event was raised. raise_count
Number of occurrences needed in order to raise the
event; if not specified, the event is raised on the first
occurrence. occurs
Number of occurrences must occur within this number
of POSIX timer units in order to raise the event; if
not specified, the period check does not apply. period_sec period_msec
Regular expression used to perform syslog message
pattern matching. pattern
Set _cerrno
Yes
(_cerr_sub_err = 2) FH_ESYSERR (generic/unknown error from OS/system)
This error means that the operating system reported an error. The POSIX errno value that is reported with the
error should be used to determine the cause of the operating system error.
(_cerr_sub_err = 9) FH_EMEMORY (insufficient memory for request)
This error means that an internal EEM request for memory failed.
(_cerr_sub_err = 22) FH_ENULLPTR (event detector internal error - ptr is null)
This error means that an internal EEM event detector pointer was null when it should have contained a value.
(_cerr_sub_err = 45) FH_ESEQNUM (sequence or workset number out of sync)
This error means that the event detector sequence or workset number was invalid.
(_cerr_sub_err = 46) FH_EREGEMPTY (registration list is empty)
This error means that the event detector registration list was empty.
(_cerr_sub_err = 54) FH_EFDUNAVAIL (connection to event detector unavailable)
This error means that the event detector was unavailable.
sys_reqinfo_syslog_history
Queries the history of the specified syslog message.
Syntax
sys_reqinfo_syslog_history
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
2006
sys_reqinfo_syslog_history