Cisco Catalyst 2960 Series, Руководство по настройке

Страница: 1615 / 2288

Purpose Command or Action
• zone — Enters the name of the time zone to be displayed when
standard time is in effect. The default is UTC.
• hours-offset — Enters the hours offset from UTC.
•
(Optional) minutes-offset
—
Enters the minutes offset from
UTC. This available where the local time zone is a percentage
of an hour different from UTC.
Returns to privileged EXEC mode. end
Example:
Switch(config)# end
Step 4
Verifies your entries. show running-config
Example:
Switch# show running-config
Step 5
(Optional) Saves your entries in the configuration file. copy running-config startup-config
Example:
Switch# copy running-config
Step 6
startup-config
Configuring Summer Time (Daylight Saving Time)
To configure summer time (daylight saving time) in areas where it starts and ends on a particular day of the
week each year, perform this task:
SUMMARY STEPS
1. enable
2.
configure terminal
3. clock summer-time zone date date month year hh:mm date month year hh:mm [ offset ]]
4.
clock summer-time zone recurring [ week day month hh:mm week day month hh:mm [ offset ]]
5.
end
6. show running-config
7.
copy running-config startup-config
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1533
How to Administer the Switch