Cisco Catalyst 2960 Series, Руководство по настройке

Страница: 1289 / 2288

Switch(config-if)# ip access-group 2 in
Examples: Extended ACLs
In this example, the first line permits any incoming TCP connections with destination ports greater than 1023.
The second line permits incoming TCP connections to the Simple Mail Transfer Protocol (SMTP) port of
host 128.88.1.2. The third line permits incoming ICMP messages for error feedback.
Switch(config)# access-list 102 permit tcp any 128.88.0.0 0.0.255.255 gt 1023
Switch(config)#
access-list 102 permit tcp any host 128.88.1.2 eq 25
Switch(config)#
access-list 102 permit icmp any any
Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# ip access-group 102 in
In this example, suppose that you have a network connected to the Internet, and you want any host on the
network to be able to form TCP connections to any host on the Internet. However, you do not want IP hosts
to be able to form TCP connections to hosts on your network, except to the mail (SMTP) port of a dedicated
mail host.
SMTP uses TCP port 25 on one end of the connection and a random port number on the other end. The same
port numbers are used throughout the life of the connection. Mail packets coming in from the Internet have
a destination port of 25. Outbound packets have the port numbers reversed. Because the secure system of the
network always accepts mail connections on port 25, the incoming and outgoing services are separately
controlled. The ACL must be configured as an input ACL on the outbound interface and an output ACL on
the inbound interface.
Switch(config)# access-list 102 permit tcp any 128.88.0.0 0.0.255.255 eq 23
Switch(config)#
access-list 102 permit tcp any 128.88.0.0 0.0.255.255 eq 25
Switch(config)#
interface gigabitethernet1/0/1
Switch(config-if)# ip access-group 102 in
In this example, the network is a Class B network with the address 128.88.0.0, and the mail host address is
128.88.1.2. The
established keyword is used only for the TCP to show an established connection. A match
occurs if the TCP datagram has the ACK or RST bits set, which show that the packet belongs to an existing
connection. Gigabit Ethernet interface 1 on stack member 1 is the interface that connects the router to the
Internet.
Switch(config)#
access-list 102 permit tcp any 128.88.0.0 0.0.255.255 established
Switch(config)# access-list 102 permit tcp any host 128.88.1.2 eq 25
Switch(config)# interface gigabitethernet1/0/1
Switch(config-if)# ip access-group 102 in
Examples: Named ACLs
Creating named standard and extended ACLs
This example creates a standard ACL named internet_filter and an extended ACL named marketing_group .
The internet_filter ACL allows all traffic from the source address 1.2.3.4.
Switch(config)# ip access-list standard Internet_filter
Switch(config-ext-nacl)# permit 1.2.3.4
Switch(config-ext-nacl)# exit
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1207
Configuration Examples for ACLs