manualshive.com logo in svg

Cisco Catalyst 2928, Руководство по настройке программного обеспечения

Скачайте бесплатное руководство по настройке программного обеспечения для Cisco Catalyst 2928 на manualshive.com. Этот мануал поможет вам разобраться с функциональностью продукта и оптимизировать его работу. Не упустите возможность загрузить его сейчас, чтобы использовать все возможности вашего оборудования.

Поделиться
Скачать
background image

 

8-29

Catalyst 2928 Switch Software Configuration Guide

OL-23389-01

Chapter 8      Configuring Switch-Based Authentication

Controlling Switch Access with RADIUS

Configuring Settings for All RADIUS Servers

Beginning in privileged EXEC mode, follow these steps to configure global communication settings 
between the switch and all RADIUS servers:

To return to the default setting for the retransmit, timeout, and deadtime, use the 

no

 forms of these 

commands.

Configuring the Switch to Use Vendor-Specific RADIUS Attributes

The Internet Engineering Task Force (IETF) draft standard specifies a method for communicating 
vendor-specific information between the switch and the RADIUS server by using the vendor-specific 
attribute (attribute 26). Vendor-specific attributes (VSAs) allow vendors to support their own extended 
attributes not suitable for general use. The Cisco RADIUS implementation supports one vendor-specific 
option by using the format recommended in the specification. Cisco’s vendor-ID is 9, and the supported 
option has vendor-type 1, which is named 

cisco-avpair

. The value is a string with this format:

protocol : attribute sep value *

Protocol

 is a value of the Cisco protocol attribute for a particular type of authorization. 

Attribute

 and 

value

 are an appropriate attribute-value (AV) pair defined in the Cisco specification, and 

sep

 

is 

=

 for mandatory attributes and is 

*

 for optional attributes. The full set of features available for 

authorization can then be used for RADIUS. 

For example, this AV pair activates Cisco’s 

multiple named ip address pools

 feature during IP 

authorization (during PPP IPCP address assignment):

cisco-avpair= 

”ip:addr-pool=first“

Command

Purpose

Step 1

configure terminal

Enter global configuration mode.

Step 2

radius-server key

 

string

Specify the shared secret text string used between the switch and all 
RADIUS servers.

Note

The key is a text string that must match the encryption key used on 
the RADIUS server. Leading spaces are ignored, but spaces within 
and at the end of the key are used. If you use spaces in your key, do 
not enclose the key in quotation marks unless the quotation marks 
are part of the key.

Step 3

radius-server retransmit

 

retries

Specify the number of times the switch sends each RADIUS request to the 
server before giving up. The default is 3; the range 1 to 1000.

Step 4

radius-server timeout

 

seconds

Specify the number of seconds a switch waits for a reply to a RADIUS 
request before resending the request. The default is 5 seconds; the range is 
1 to 1000.

Step 5

radius-server deadtime

 

minutes

Specify the number of minutes a RADIUS server, which is not responding 
to authentication requests, to be skipped, thus avoiding the wait for the 
request to timeout before trying the next configured server. The default is 
0; the range is 1 to 1440 minutes.

Step 6

end

Return to privileged EXEC mode.

Step 7

show running-config

Verify your settings.

Step 8

copy running-config startup-config

(Optional) Save your entries in the configuration file.

Содержание Catalyst 2928





























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Catalyst 2928

D-Link AirPlus DWL-810 Owner'S Manual preview
AirPlus DWL-810
Бренд: D-Link Страницы: 25
B+B SmartWorx CR10 v2 Start Manual preview
CR10 v2
Бренд: B+B SmartWorx Страницы: 4
Cambium Networks PTP 820 Series Manual preview
PTP 820 Series
Бренд: Cambium Networks Страницы: 29
H3C SR6600 Series Faq preview
SR6600 Series
Бренд: H3C Страницы: 22
H3C S5800-60C-PWR Ordering Manual preview
S5800-60C-PWR
Бренд: H3C Страницы: 3
Obihai OBi110 Quick Start Manual preview
OBi110
Бренд: Obihai Страницы: 2
Vonets MINI300 Quick Setting Manual preview
MINI300
Бренд: Vonets Страницы: 8
NETGEAR AC1450 Installation Manual preview
AC1450
Бренд: NETGEAR Страницы: 14
IBM BladeCenter Management Module Installation And User Manual preview
BladeCenter Management Module
Бренд: IBM Страницы: 184
TRENDnet TE100-S16 - 10/100Mbps Ethernet Switch User Manual preview
TE100-S16 - 10/100Mbps Ethernet Switch
Бренд: TRENDnet Страницы: 15
Buffalo LinkStation Mini User Manual preview
LinkStation Mini
Бренд: Buffalo Страницы: 71
Paradyne Hotwire 8775 MSDSL Installation Instructions Manual preview
Hotwire 8775 MSDSL
Бренд: Paradyne Страницы: 10
Lantech IMR-3003 User Manual preview
IMR-3003
Бренд: Lantech Страницы: 40
Aewin Technologies SCB-9651 User Manual preview
SCB-9651
Бренд: Aewin Technologies Страницы: 86
Compro Technology RS-2104 Quick Installation Manual preview
RS-2104
Бренд: Compro Technology Страницы: 2
Korenix JetNet 3705 User Manual preview
JetNet 3705
Бренд: Korenix Страницы: 25
MiWire SeaWire Pro User Manual preview
SeaWire Pro
Бренд: MiWire Страницы: 24
ADTRAN NetVanta Analog Modem Dial Backup Interface Module Quick Start Manual preview
NetVanta Analog Modem Dial Backup Interface Module
Бренд: ADTRAN Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды