SAS Connection
Connections
32
Cisco C880 M4 Storage Subsystem Operating Manual for Server with E7-8800 v3 CPU
6.
Connections
If you would like to put the Storage Subsystem into operation, the SAS
and the power supply connections must be inserted.
SAS Connection
The required connections are on the rear panel of the storage subsystem.
1
2
Figure 18: SAS connections of the Storage Subsystem I/O module (Mini SAS HD ports)
1.
SAS IN port
2.
SAS OUT port
Set up the data connection between the server and the Storage
Subsystem by inserting the Mini SAS HD plug of the SAS cable
coming from the server into the SAS IN port connector of the Storage
Subsystem.
The cable tab must always be located at the lower side of the plug.
Figure 19: Orientation of the Mini SAS HD plugs
i
