Package Contents
The following figure shows the package contents for the SMA M195, M395, M695, and M695F. Note that
the contents are subject to change and your exact contents might contain additional or fewer items.
Figure 3: Package Contents
RJ-45 to DB9-RS232 console cable (Cisco part
number 72-3383-XX)
2
Chassis
1
RJ-45 to RJ-45 Cat 5 Ethernet cable, yellow six
feet long (Cisco part number 72-1482-XX)
4
Cisco rail kit (Cisco part number 800-43376-02)
3
Two 1-Gb or 10-Gb SFP+ fiber optic transceivers
with cables
Supported on the M695F. You cannot
mix SFP transceiver types in the same
chassis. You can either have two 1-Gb
or two 10-Gb SFPs in the same
chassis.
Note
6
Useful Links document
The steps in the Useful Links document send you
to the documentation you need to install, set up,
and configure your SMA appliance.
5
Serial Number Locations
The serial number (SN) for the SMA M195, M395, M695, and M695F is printed on the pullout asset card
located on the front panel as shown in the following figure.
Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide
4
Overview
Package Contents
