g709 odu overhead tti
To configure the Trail Trace Identifier (TTI) level for an Optical Channel Data Unit (ODU), use the
g709
odu overhead tti
command in DWDM configuration mode. To return to the default, use the
no
form of this
command.
g709 odu overhead tti
{
expected| sent
} {
ascii| hex
}
tti-string
no g709 odu overhead tti
{
expected| sent
} {
ascii| hex
}
tti-string
Syntax Description
Configures the expected TTI string.
expected
Configures the transmit TTI string.
sent
Indicates that the string is in ASCII format.
ascii
Indicates that the string is in hexidecimal format.
hex
The TTI level string. You can configure the TTI level string in ASCII string format
or hexadecimal format. The ASCII text string can be a maximum of 64 characters.
The hexadecimal string length must be an even number and can be a maximum of
128 bytes.
tti-string
Command Default
No TTI level string is configured.
Command Modes
DWDM configuration
Command History
Modification
Release
This command was introduced.
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Operations
Task ID
read, write
dwdm
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
11
Dense Wavelength Division Multiplexing Commands on the Cisco ASR 9000 Series Router
g709 odu overhead tti