Cisco ASR 9000 Series Скачать руководство пользователя

Страница: 221 / 1138

domain

To create and name a container for all domain configurations and enter the CFM domain configuration mode,
use the

domain

command in CFM configuration mode. To remove the domain, use the no form of this

command.

domain domain-name level level-value

[

id null

[

dns dns-name

][

mac H.H.H

][

string string

]]

no domain domain-name level level-value

[

id null

[

dns dns-name

][

mac H.H.H

][

string string

]]

Syntax Description

Administrative name unique to this container, case sensitive ASCII string, up to
80 characters.

domain-name

The CFM protocol level of this domain. Range is 0 to 7.

level level-value

(Optional) Maintenance domain identifier (MDID) used in conjunction with one
of the following keywords to specify the MDID type and value:

•

null

•

dns DNS-name

•

mac H.H.H

•

string string

(Optional) Null value ID, used with the

keyword.

null

(Optional) DNS name, up to 43 characters in length, used with the

keyword.

dns DNS-name

(Optional) Hexadecimal MAC address, used with the

keyword.

mac H.H.H

(Optional) Maintenance domain identifier (MDID) value, up to 43 characters in
length, used with the

keyword.

The domain name may be the used here as the maintenance domain
identifier (MDID) if desired.

Note

string string

Command Default

is not specified, the domain name is used as the MDID.

Command Modes

CFM configuration (config-cfm)

Command History

Modification

Release

This command was introduced.

Release 3.9.0

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x

201

Ethernet OAM Commands on the Cisco ASR 9000 Series Router

domain

Содержание ASR 9000 Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ASR 9000 Series

Отзывы:

Похожие инструкции для ASR 9000 Series

Бренды по названию

Популярные бренды

Cisco ASR 9000 Series, Справочник по командам

Результаты поиска

Содержание ASR 9000 Series

Отзывы:

Похожие инструкции для ASR 9000 Series

Бренды по названию

Популярные бренды