C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
CDP Commands on Cisco IOS XR Software
show cdp entry
SMR-62
Cisco ASR 14000 Series Router System Management Command Reference
OL-17231-01
show cdp entry
To display information about a specific neighboring device or all neighboring devices discovered using
Cisco Discovery Protocol (CDP), use the
show cdp entry
command in EXEC mode.
show cdp entry
{
*
|
entry-name
}
[
protocol
|
version
]
Syntax Description
Defaults
This command displays information about a particular device that has been discovered by CDP.
Command Modes
EXEC
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID
Examples
The following is sample output from the
show cdp entry
command. Information about device ID,
address, platform, interface, holdtime, and version is displayed.
RP/0/RP0/CPU0:router#
show cdp entry TBA04341195
-------------------------
Device ID: TBA04341195(sys-235)
SysName : sys-235
Entry address(es):
IP address: 172.16.23.9
Platform: WS-C6006, Capabilities: Trans-Bridge Switch
Interface: MgmtEth0/RP1/CPU0/0
Port ID (outgoing port): 4/18
Holdtime : 157 sec
Version :
*
Displays all CDP neighbors.
entry-name
Name of a neighbor about which you want information.
protocol
(Optional) Displays protocol information associated with CDP neighbor
entries.
version
(Optional) Displays version information associated with CDP neighbor
entries.
Release
Modification
Release 3.7.1
This command was introduced on the Cisco ASR 14000 Series Router.
Task ID
Operations
cdp
read, write
