C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Process and Memory Management Commands on Cisco IOS XR Software
exception filepath
SMR-504
Cisco ASR 14000 Series Router System Management Command Reference
OL-17231-01
exception filepath
To modify core dump settings, use the
exception filepath
command in administration configuration
mode or in global configuration mode. To remove the configuration, use the
no
form of this command.
exception
[
choice
preference
] [
compress
{
on
|
off
}] [
filename
filename
lower-limit
-
higher-limit
]
filepath
filepath
no
exception
[
choice
preference
] [
compress
{
on
|
off
}] [
filename
filename
lower-limit
-
higher-limit
] [
filepath
filepath
]
Syntax Description
Defaults
If you do not specify the order of preference for the destination of core dump files using the
choice
keyword and
preference
argument, the default preference is the primary location (that is,
choice
1
).
Core dump files are sent compressed.
The default filenaming convention used for core dump files is described in the “Usage Guidelines”
section. See
choice
preference
(Optional) Configures the order of preference for the destination of core
dump files. Up to the three destinations can be defined. Valid values are
1 to 3.
compress
{
on
|
off
}
(Optional) Specifies whether or not the core dump file should be sent
compressed. By default, core dump files are sent compressed. If you
specify the
compress
keyword, you must specify one of the following
required keywords:
•
on
—Compresses the core dump file before sending it.
•
off
—Does not compress the core dump file before sending it.
filename
filename
lower-limit
-
higher-limit
(Optional) Specifies the filename to be appended to core dump files and
the lower and higher limit range of core dump files to be sent to a
specified destination before being recycled by the circular buffer.
See
in the “Usage Guidelines” section for a description of the
default core dump file naming convention.
Valid values for the
lower-limit
argument are 0 to 4. Valid values for the
higher-limit
argument are 5 to 64. A hyphen (
-
) must immediately follow
the
lower-limit
argument.
Note
To uniquely identify each core dump file, a value is appended to
each core dump file, beginning with the lower limit value
configured for the
lower-limit
argument and continuing until the
higher limit value configured for the
higher-limit
argument has
been reached. After the higher limit value has been reached, the
Cisco IOS XR software begins to recycle the values appended to
core dump files, beginning with the lower limit value.
filepath
Local file system or network protocol, followed by the directory path.
All local file systems are supported. The following network protocols
are supported: TFTP and FTP.
