Cisco ASR 1001-X Скачать руководство пользователя страница 95

Страница: 95 / 152

License Type: EvalRightToUse

License State: Inactive

Evaluation total period: 8 weeks 4 days

Evaluation period left: 8 weeks 1 day

Period used: 2 days 8 hours

Lock type: Non Node locked

Vendor info: <UDI><PID>NOTLOCKED</PID><SN>NOTLOCKED</SN></UDI><T>RTU</T>

License Addition: Additive

License Generation version: 0x8200000

License Count: 0/0 (In-use/Violation)

License Priority: Low

router#

Table 21: show license all Command Output Description

Description

Field Name

Primary license storage.

License Store: Primary License Storage

Built-in license storage.

License Store: Built-In License Storage

Per Port Counted License (10-GE Interfaces)

The 10-GE interfaces on the Cisco ASR 1001-X Router use a per port counted license, which has the following
features:

•

Count-based licenses will be used for 10-GE ports, 1 count per port.

•

An End-User License Agreement (EULA) will be displayed for each port if there is no permanent license
present to support these ports.

•

The image carries 2-count 10-GE port EvalRTU (Evaluation) licenses. If the EvalRTU license expires,
it becomes a Right-To-Use (RTU) license.

•

The

no shut

command on a 10-GE interface requests one count of the license, and the In-use count

increases by 1.

•

The

shut

command on a 10-GE interface releases one count of the license, and the In-use count decreases

by 1.

The following EvalRTU license example displays the EvalRTU licenses used on the 10-GE ports. A Permanent
license would work similarly:

StoreIndex: 13 Feature: interface_10g Version: 1.0

License Type: EvalRightToUse

License State: Inactive

Cisco ASR 1001-X Router Hardware Installation Guide

Cisco ASR 1001-X Router License Verification

Per Port Counted License (10-GE Interfaces)

Содержание ASR 1001-X
























































































































































Результаты поиска

Содержание ASR 1001-X

Отзывы:

Cisco ASR 1001-X, Руководство по установке оборудования, Страница: 95 / 152

Результаты поиска

Содержание ASR 1001-X

Отзывы: