background image

 

Americas Headquarters:

© 2007 Cisco Systems, Inc. All rights reserved.

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Cisco Aironet High Gain Omnidirectional Ceiling 
Mount Antenna (AIR-ANT1728)

Overview 

This document outlines the specifications, describes the high gain omnidirectional ceiling mount 
antenna, and provides instructions for mounting it on a suspended ceiling track. Designed for WLAN 
applications operating in the 2.4- to 2.5-GHz frequency range, the antenna has a nominal gain of 5.2 dBi. 
The antenna is used primarily with access points, but is compatible with Cisco Aironet radio products 
utilizing a reverse-polarity threaded Neil Concelman (RP-TNC) connector.

Technical Specifications

Antenna type

Dipole

Operating frequency range

2.4- to 2.483-GHz

VSWR

Less than 2:1, 1.5:1 
nominal

Gain

5.2 dBi

Polarization

Vertical

E-Plane (3dB bandwidth)

40 degrees

H-Plane (3dB bandwidth)

Omnidirectional

Cable length and type

3 ft (0.91 m)
Plenum rated RG-58

Dimensions (H x W)

11.5 in. x 1.25 in.
(29.2 cm x 3.2 cm)

Weight

4.6 oz (131 g)

Содержание Aironet High Gain Omnidirectional Ceiling Mount Antenna AIR-ANT1728

Страница 1: ...ions operating in the 2 4 to 2 5 GHz frequency range the antenna has a nominal gain of 5 2 dBi The antenna is used primarily with access points but is compatible with Cisco Aironet radio products utilizing a reverse polarity threaded Neil Concelman RP TNC connector Technical Specifications Antenna type Dipole Operating frequency range 2 4 to 2 483 GHz VSWR Less than 2 1 1 5 1 nominal Gain 5 2 dBi ...

Страница 2: ...ight and in a direct line of sight with no obstructions If this is not possible and reception is poor you should try different mounting positions to optimize reception The antenna is designed to attach to and hang from a standard suspended ceiling track having a width from 13 16 inches 20 6 millimeters to 1 1 4 inches 31 7 millimeters Tools and Equipment Required To install the antenna on a suspen...

Страница 3: ... Loosen the hex nut on the ceiling track bracket Step 3 Position the bracket on the ceiling track See Figure 1 Figure 1 Positioning the Ceiling Track Bracket Step 4 Squeeze the bracket firmly onto the ceiling track Step 5 Use a 7 16 inch 11 1 millimeter wrench to tighten the hex nut Do not overtighten Step 6 Carefully screw the antenna onto the bracket s threaded stud until it is hand tight See Fi...

Страница 4: ...CCDP CCIE CCIP CCNA CCNP CCSP Cisco the Cisco Certified Internetwork Expert logo Cisco IOS Cisco Press Cisco Systems Cisco Systems Capital the Cisco Systems logo Cisco Unity Enterprise Solver EtherChannel EtherFast EtherSwitch Fast Step Follow Me Browsing FormShare GigaDrive GigaStack HomeLink Internet Quotient IOS iPhone IP TV iQ Expertise the iQ logo iQ Net Readiness Scorecard iQuick Study Light...

Отзывы: