Smart Network Application (SNA)
Search
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
503
25
User-Defined Tags
You can create new tags and add them manually to selected elements in the topology in the
Tags section of the right-hand information.
To create a new tag perform the following steps:
STEP 1
In the Tags section, click in the
Add tag name
text box and enter a tag name.
STEP 2
Click
ADD+
. The tag name is then displayed. The below shows that the tag
first_floor
has
been created.
You may add tags that have the same names as built-in tags. These tags appear similar to user-
defined tags and you can remove them at any time. Since these tags are distinct from the built-
in tags, it is possible for tags with the same name to appear twice on a single element as long
as one of them is user-defined and the other is built-in.
To add a tag to a device perform the following steps:
STEP 1
Select the device.
STEP 2
In the Tag section, click the
Add tag name
text box. A list of tags is displayed.
STEP 3
Select the tag to be applied to the device.
Search
Use the search functionality to locate specific devices in the Topology view.
