Cisco Aironet 1570 Series, Руководство по установке

Страница: 85 / 168

3-41
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
OL-32138-01
Chapter 3 Mounting the Access Point
Pole Mount Kit 3
Pole Mount Kit 3
The Pole Mount Kit 3 (abbreviated as PMK3) can be used to horizontally mount the AP on a vertical
pole, a horizontal pole, or on an off-angle pole, that has a diameter of 2 to 16 inches. This kit can also
be used to horizontally mount the AP on a wall.
The PMK3 consists of these parts:
• A wall mount bracket for horizontal mounting (see Figure 3-30 )
•
A pivot bracket, same as that in PMK2 (see Figure 3-18 )
• Two strap brackets, same as those in PMK2 (see Figure 3-19 )
•
Two adjustable steel band straps
Figure 3-18 illustrates the pole diameter indicators and bolt holes on the pivot bracket. The Pivot Bracket
and the Strap Brackets, are used only when mounting the AP on poles.
By itself, the PMK3 Wall Mount Bracket, is used for horizontally mounting on the AP on walls. For more
information, see
Wall Mounting Using PMK3, page 3-50 . When mounting the AP on poles, the Wall
Mount Bracket is used along with the Pivot Bracket and the Strap Brackets.
When all three pieces of the PKM3 kit are assembled, the pivot bracket attached to the wall mount
bracket allows reorienting the PMK2 mount assembly by up to 90 degrees from vertical. This allows the
AP to be vertically mounted on horizontal poles and off-angle poles. The pivot bracket also provides
three sets of bolt holes for the strap brackets to attach, thereby supporting three pole diameter ranges:
2 to 6, 6 to 11, and 11 to 16 inches (see
Figure 3-18 and Figure 3-19 ).
For more information on horizontally mounting the AP on poles, see Pole Mounting Using PMK3,
page 3-43 .
Figure 3-29 PMK3 Wall Mount Bracket Dimensions in inches [and millimeters]
353245
104.14
2.88
4.10
73.03
33.34
1.31
4 x .33
215.90
2.50
8.50
63.50
167.60
6.60
4 x .35
5.57
141.47
98.70
3.89