Cisco Aironet 1570 Series, Руководство по установке

Страница: 53 / 168

3-9
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
OL-32138-01
Chapter 3 Mounting the Access Point
Strand Mount Kit 2
Step 3
Continue with installing antennas, connecting the data cables, grounding the access point, and powering
the access point. For information on these, see
Chapter 4, “Installing Other Components.”
Strand Mount Kit 2
The Strand Mount Kit 2 (abbreviated as SMK2) can accommodate a 1.75 inch cable bundle between the
support cable strand and the back surface of the AP. The SMK2 allows a distance of 2.42 inches from
the back surface of the AP to the center of the cable strand (see
Figure 3-4 ).
The SMK2 consists of these parts:
•
Strand mount cable brackets (see Figure 3-5 )
• Cable clamps (see Figure 3-5 )
•
5/16"-18 bolt for fastening the cable clamps to the strand mount cable bracket (see Figure 3-5 )
For instructions on mounting an AP using SMK2, see Strand Mounting Using SMK2, page 3-10 .
Figure 3-3 SMK2 Cable Clamps and Cable Bracket Assembly Dimensions in inches [and millimeters]
353374
88.4
3.48
103.2
4.06
61.572
2.42
63.5
2.50