Install and Remove QSFP Transceiver Modules
This section provides the installation, cabling, and removal instructions for the Quad Small Form-Factor
Pluggable transceiver modules. Refer to the
Cisco Optical Transceiver Handling Guide
for additional details
on optical transceivers.
The following figure shows a 400-Gigabit QSFP-DD optical transceiver.
Figure 14: 400-Gigabit QSFP-DD Transceiver Module
QSFP-DD transceiver
body
2
Pull-tab
1
Electrical connection to
the module circuitry
3
Statement number—1092
Hot surface for Field Replaceable Units
Hot surface. Use care when handling.
Warning
Installing the Transceiver Module
Statement number—1092
Hot surface for Field Replaceable Units
Hot surface. Use care when handling.
Warning
The transceiver module is a static-sensitive device. Always use an ESD wrist strap or similar individual
grounding device when handling transceiver modules or coming into contact with system modules.
Caution
Hardware Installation Guide for Cisco 8100 Series Routers
28
Connect Router to the Network
Install and Remove QSFP Transceiver Modules
