Cisco 7965G - Unified IP Phone VoIP Скачать руководство пользователя страница 225

Страница: 225 / 302

Description

Item

Version of the user locale loaded on the phone.

User Locale Version

Version of the network locale loaded on the phone.

Network Locale Version

Indicates whether the PC port on the phone is enabled or disabled.

PC Port Disabled

Indicates whether the speakerphone is enabled on the phone.

Speaker Enabled

Indicates whether the phone learns MAC addresses from Gratuitous ARP
responses.

GARP Enabled

Indicates whether the phone can participate in video calls when connected to an
appropriately equipped PC.

Video Capability
Enabled

Indicates whether the phone allows a device attached to the PC port to access the
Voice VLAN.

Voice VLAN Enabled

Indicates whether the phone shifts the call focus to incoming calls on all lines.

Auto Line Select

DSCP IP classification for call control signaling.

DSCP for Call Control

DSCP IP classification for any phone configuration transfer.

DSCP for Configuration

DSCP IP classification for phone-based services.

DSCP for Services

Displays the security mode that is set for the phone.

Security Mode

Indicates whether web access is enabled (Yes) or disabled (No) for the phone.

Web Access Enabled

Indicates whether the phone will forward packets transmitted and received on the
network port to the access port.

Span to PC Port

VLAN used to identify and remove 802.1P/Q tags from packets sent to the PC.

PC VLAN

Indicates whether the internal switch begins forwarding packets between the PC
port and switched port on the phone when the phone becomes active.

Forwarding Delay

Indicates whether CDP is supported on the PC port.

CDP: PC Port

Indicates whether CDP is supported on the switch port.

CDP: SW Port

Indicates whether Link Layer Discovery Protocol Media Endpoint Discovery
(LLDP-MED) is enabled on the switch port.

LLDP-MED: SW Port

Indicates whether Link Layer Discovery Protocol (LLDP) is enabled on the PC
port.

LLDP: PC Port

Identifies the asset ID assigned to the phone for inventory management.

LLDP Asset ID

Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified

Communications Manager 9.0 (SCCP and SIP)

205

Remote Monitoring

Network Configuration Area

Содержание 7965G - Unified IP Phone VoIP















































































































































































































































































































Результаты поиска

Содержание 7965G - Unified IP Phone VoIP

Отзывы:

Cisco 7965G - Unified IP Phone VoIP, Руководство пользователя программного обеспечения, Страница: 225 / 302

Результаты поиска

Содержание 7965G - Unified IP Phone VoIP

Отзывы: