Cisco 7965G - Unified IP Phone VoIP Скачать руководство пользователя страница 205 | Manualshive

Страница: 205 / 302

Cisco 7965G - Unified IP Phone VoIP Скачать руководство пользователя страница 205

Possible explanation and action

Description

Message

Phone has CTL and ITL files installed and
it failed to update the new CTL and ITL
files.

Possible reasons for failure

:

•

Network failure.

•

TFTP server was down.

•

The new security token used to sign
CTL file and the TFTP certificate used
to sign ITL file are introduced, but are
not available in the current CTL and
ITL files in the phone.

•

Internal phone failure.

Possible solutions

:

•

Check the network connectivity.

•

Check if the TFTP server is active and
functioning normally.

•

If the Trust Verification Service (TVS)
server is supported on Cisco Unified
Communications Manager, check if
the TVS server is active and
functioning normally.

•

Verify if the security token and the
TFTP server are valid.

•

Manually delete the CTL and ITL files
if all the above solutions fail, and reset
the phone.

The CTL and ITL files are installed
on the phone, and it failed to update
the new files.

Trust List update failed

None. This message is informational only.

For more information about the Trust List,
see the

Cisco Unified Communications

Manager Security Guide

.

The CTL file, the ITL file, or both
files are updated.

Trust List updated

Make sure that the phone load file has the
correct name.

The name of the phone load file is
incorrect.

Version error

None. This is an informational message
indicating the name of the configuration file
for the phone.

Name of the configuration file.

XmlDefault
corresponding to the
phone device name

Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified

Communications Manager 9.0 (SCCP and SIP)

185

Model Information, Status, and Statistics

Status Messages Screen

«
...
203
204
205
206
207
...
»

Содержание 7965G - Unified IP Phone VoIP















































































































































































































































































































Отзывы:

Нет отзывов