Cisco 7902G - Unified IP Phone VoIP, Руководство администратора

Страница: 149 / 208

A-1
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
A P P E N D I X
A
Additional Configuration Methods and
Parameters
The Cisco Unified IP Phone must be correctly configured before it will operate
properly. When you configure a phone, you specify parameters and values that
instruct the phone how to operate in your environment. Configuring provides the
phone with instructions for many aspects of its operation, including how to
interact with the network and how to handle IP telephony protocols.
In general, configuring the Cisco Unified IP Phone 7902G, 7905G, and 7912G can
be accomplished through Cisco Unified CallManager and through the network
configuration options on a phone. These processes are described in detail in this
manual.
This appendix describes the following additional methods for configuring the
Cisco Unified IP Phone 7902G, 7905G, and 7912G. These methods are optional
and are available to help you configure your phones most efficiently and to
provide certain configuration options that are not available through other
methods.
•
Through a profile file—A profile file contains various parameters and values
for phone and network settings. This file is stored on a Trivial File Transfer
Protocol (TFTP) server and is downloaded to the phone.
• Through the phone’s web page—Each phone has a web page from which you
can view and update many parameter values.
•
Through the phone’s Interactive Voice Response (IVR) system
(Cisco Unified IP Phone 7902G only)