background image

Corporate Headquarters:

© 2005 Cisco Systems, Inc. All rights reserved.

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Catalyst 6509 Switch, Cisco 7606 Router, and 
Cisco 7609 Router with VPN Services Module 
Certification Note

This is the non-proprietary Cryptographic Module Security Policy for the Catalyst 6509 switch and the 
Cisco 7606 and Cisco 7609 routers with the VPN Services Module:

Hardware Version

Catalyst 6509 switch

Cisco 7606 router

Cisco 7609 router

Backplane chassis

Hardware Version 3.0 (Catalyst 6509 switch) 

Hardware Version 1.0 (Cisco 7606 router)

Hardware Version 1.0 (Cisco 7609 router)

Supervisor Engine—Hardware Version 3.2

VPN Services Module—Hardware Version 1.2; Firmware Version; 12.2(14)SY3

This security policy describes how the Catalyst 6509 switch and the Cisco 7606 and Cisco 7609 routers 
with the VPN Services Module meet the security requirements of FIPS 140-2, and describes how to 
operate the hardware devices in a secure FIPS 140-2 mode. This policy was prepared as part of the 
Level 2 FIPS 140-2 validation of the Catalyst 6509 switch and the Cisco 7606 and Cisco 7609 routers 
with the VPN Services Module.

FIPS 140-2 (

Federal Information Processing Standards Publication 140-2—Security Requirements for 

Cryptographic Modules

) details the U.S. Government requirements for cryptographic modules. More 

information about the FIPS 140-2 standard and validation program is available on the NIST website at 
http://csrc.nist.gov/cryptval/.

Содержание 7606





























Отзывы: