1
12.1(5)T and 12.2(14) S
Cisco 7200-I/O-GE+E and Cisco 7200-I/O-2FE/E
Input/Output Controllers
This feature module describes the two new variants of the Cisco 7200 I/O card. The
Cisco 7200-I/O-GE+E provides one Gigabit Ethernet port and one Ethernet port. The
Cisco 7200-I/O-2FE/E provides two autosensing Fast Ethernet 10/100 Mb ports.
This document includes the following sections:
•
Feature Overview
•
Supported Platforms
•
Supported Standards, MIBs, and RFCs
•
Configuration Tasks
•
Monitoring and Maintaining the Cisco 7200-I/O GE+E and Cisco 7200-2FE/E
•
Configuration Examples
•
Command Reference
Feature Overview
The Cisco 7200-I/O-GE+E is an Input/Output controller that provides one Gigabit Ethernet and one
Ethernet port. It is equipped with a GBIC receptacle for 1000 megabits per second (Mbps) operation
and an RJ-45 receptacle for 10 Mbps operation.
The Cisco 7200-I/O-2FE/E is an Input/Output controller that provides two autosensing Fast Ethernet
ports and is equipped with two RJ-45 receptacles for 10/100 Mbps operation.
I/O controllers support the following features:
•
Dual EIA/TIA-232 channels for local console and auxiliary ports
•
NVRAM for storing the system configuration and environmental monitoring logs
•
Two PC Card slots that hold Flash disks or Flash memory cards for storing the default Cisco IOS
software image
•
Flash memory for storing the boot helper image
•
Two environmental sensors for monitoring the cooling air as it enters and leaves the chassis
