Cisco 6841 страница 26 Скачать руководство пользователя

Страница: 26 / 84

Description

Accessibility Feature

Item

Allow you to easily access your messages,
applications, and contacts.

Messages

button,

Applications

button, and

Contacts

button

•

These three large buttons are located to the
left of the Navigation cluster.

•

In this group of buttons, the

Messages

button

is the single button in the top row. Below the

Messages

button, the

Applications

button

is on the left, and the

Contacts

button is on

the right.

Allows you to increase or decrease the ring
volume or the sound through the handset,
headset, or speakerphone.

Press up on the rocker key to increase the
volume. Press down on the rocker key to
decrease the volume.

Volume

key

•

This key is located to the left of the keypad.

Allows you to use existing or familiar key
positions. Key 5 has a nib.

Standard 12-key layout

Provide audible notification of the phone
state:

•

Toggle the

Headset

Mute

, and

Speakerphone

buttons on and off to

indicate the phone state.

•

Use the

Headset

button to toggle the

headset on or off. When the headset
is on, the button is lit.

•

Use the

Mute

button to toggle the

microphone on or off. When the
microphone is muted, the button is
lit. When you turn on Mute, your
phone beeps once; when you turn off
Mute, your phone beeps twice.

•

Use the

Speakerphone

button to

toggle the speakerphone on or off.
When the speakerphone is on, the
button is lit.

•

Headset

Speakerphone

, and

Mute

buttons

located to the right of the keypad.

•

The

Speakerphone

button is on the top, the

Headset

button is in the middle, and the

Mute

button is on the bottom.

Mobility-Impaired Accessibility Features

Your phone comes with standard accessibility features that require little or no setup.

Cisco IP Phone 6800 Series Multiplatform Phones User Guide

Your Phone

Accessibility Features

Содержание 6841





















































































Результаты поиска

Содержание 6841

Отзывы:

Похожие инструкции для 6841

Бренды по названию

Популярные бренды

Cisco 6841, Руководство пользователя

Результаты поиска

Содержание 6841

Отзывы:

Похожие инструкции для 6841

Бренды по названию

Популярные бренды