Cisco 6823, Руководство администратора

Страница: 24 / 194

Purpose Command or Action
Add the repeater to the system. Add a Repeater, on page 52 Step 5
Check that you can place calls. Verify the System Configuration, on page 150 Step 6
Check that the base station and repeater are
correctly placed for communication with the
handsets. Perform a Site Survey, on page 144 Step 7
Perform a backup to save the configuration. (Optional) Back Up the System Configuration,
on page 150
Step 8
Base Station Accounts
You can sign into the base station as an administrator or as a user. Your service provider gives you the IDs
and passwords.
The administrator ID gives you access to all the web pages and all fields described in this document.
The user ID gives you access to a subset fields in these web pages only:
• Home/Status
• Extensions
• Terminal
Related Topics
Base Station Web Pages , on page 83
System Behavior During Times of Network Congestion
Anything that degrades network performance can affect phone system voice quality, and in some cases, can
cause a call to drop. Sources of network degradation can include, but are not limited to, the following activities:
• Administrative tasks, such as an internal port scan or security scan
• Attacks that occur on your network, such as a Denial of Service attack
Power Outage
Your access to emergency service through the phone requires that the base station receive power. If a power
interruption occurs, service or emergency calling service dialing does not function until power is restored. If
a power failure or disruption occurs, you may need to reset or reconfigure the equipment before you can use
service or emergency calling service dialing.
Your access to emergency service also requires that the handset has sufficient battery power. If the battery
doesn't have enough power, service or emergency calling service dialing does not function until the battery
is sufficiently charged.
Cisco IP DECT 6800 Series Administration Guide
16
Cisco IP DECT 6800 Series
Base Station Accounts