Figure 8: Wall Mounting the Server
Step 2
Fix the chassis to the wall using the brackets that you attached to the device.
The screws for attaching the device to the wall are not provided with the kit. Depending on the type of wall (wood, brick,
stone etc), use appropriate screws to fix the device to the wall.
Route the cables so that they do not put a strain on the connectors or mounting hardware. You can only mount
chassis with ports going out in left or right direction. Do not mount the chassis with ports facing upward or
downward direction.
Note
Grounding the Chassis
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence
of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician
if you are uncertain that suitable grounding is available. Statement 1024
Warning
These are the steps to install the ground connection for the device:
Cisco 5100 Enterprise Network Compute System Hardware Installation Guide
18
Installing the Device
Grounding the Chassis
