2-697
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
show power inline
show power inline
Use the
show power inline
user EXEC command to display the Power over Ethernet (PoE) status for the
specified PoE port or for all PoE ports.
show power inline
[[
interface-id
|
consumption
] |
module
switch-number
] [
|
{
begin
|
exclude
|
include
}
expression
]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
Expressions are case sensitive. For example, if you enter |
exclude output
, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the
show power inline
command. In the display, port 2 is configured
as static; power has been pre-allocated to this port, but no powered device is connected. Port 6 is a static
port in the power-deny state because its maximum wattage is configured for 10 W. The connected
powered device has a reported class maximum wattage for a Class 0 or Class 3 device.
describes the output fields.
Switch>
show power inline
Module Available Used Remaining
(Watts) (Watts) (Watts)
------ --------- -------- ---------
1 370.0 114.9 255.1
2 370.0 34.3 335.
Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Fa1/0/1 auto on 6.3 IP Phone 7910 n/a 15.4
Fa1/0/2 static off 15.4 n/a n/a 15.4
interface-id
(Optional) Display PoE-related power management information for the
specified interface.
consumption
(Optional) Display the power allocated to devices connected to PoE ports.
module
switch-number
(Optional) Limit the display to ports on the specified stack member. The
switch number is 1 to 9.
|
begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
|
include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.1(19)EA1
This command was introduced.
12.2(25)SEC
The
consumption
keywords were added.
Содержание 3750 - Catalyst EMI Switch
Страница 494: ...2 464 Catalyst 3750 Switch Command Reference OL 8552 07 Chapter 2 Catalyst 3750 Switch Cisco IOS Commands reserved only ...
Страница 772: ...2 742 Catalyst 3750 Switch Command Reference OL 8552 07 Chapter 2 Catalyst 3750 Switch Cisco IOS Commands show vtp ...
Страница 1132: ...D 2 Catalyst 3750 Switch Command Reference OL 8552 07 Appendix D Acknowledgments for Open Source Software ...
