Cisco 3750 - Catalyst EMI Switch, Справочник по командам

Страница: 683 / 1154

2-653
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
show mac address-table notification
show mac address-table notification
Use the show mac address-table notification user EXEC command to display the MAC address
notification settings for all interfaces or the specified interface.
show mac address-table notification [ interface [ interface-id ]] [ | { begin | exclude | include }
expression ]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
Use the show mac address-table notification command without any keywords to display whether the
feature is enabled or disabled, the MAC notification interval, the maximum number of entries allowed
in the history table, and the history table contents.
Use the interface keyword to display the flags for all interfaces. If the interface-id is included, only the
flags for that interface appear.
Expressions are case sensitive. For example, if you enter | exclude output , the lines that contain output
do not appear, but the lines that contain Output appear.
interface (Optional) Display information for all interfaces. Valid interfaces include
physical ports and port channels.
interface-id (Optional) Display information for the specified interface. Valid interfaces
include physical ports and port channels.
| begin (Optional) Display begins with the line that matches the expression .
| exclude (Optional) Display excludes lines that match the expression .
| include (Optional) Display includes lines that match the specified expression .
expression Expression in the output to use as a reference point.
Release Modification
12.1(11)AX This command was introduced.
12.1(19)EA1 The show mac-address-table notification command (with the hyphen) was
replaced by the show mac address-table notification command (without the
hyphen).