Administration
System Settings
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
60
5
System Settings
To enter system settings:
STEP 1
Click
Administration
>
System Settings
.
STEP 2
View or modify the system settings.
•
System Description
—Displays a description of the device.
•
System Location
—Enter the physical location of the device.
•
System Contact
—Enter the name of a contact person.
•
Host Name
—Select the host name of this device. This is used in the prompt
of CLI commands:
-
Use Default
—The default hostname (System Name) of these switches is:
switch123456
, where 123456 represents the last three bytes of the
device MAC address in hex format.
-
User Defined
—Enter the hostname. Use only letters, digits, and hyphens.
Host names cannot begin or end with a hyphen. No other symbols,
punctuation characters, or blank spaces are permitted (as specified in
RFC1033, 1034, 1035).
•
Custom Banner Settings
—The following banners can be set:
-
Login Banner
—Enter text to display on the Login page before login. Click
Preview
to view the results.
-
Welcome Banner
—Enter text to display on the Login page after login.
Click
Preview
to view the results.
NOTE
When you define a login banner from the web-based configuration
utility, it also activates the banner for the CLI interfaces (Console, Telnet, and
SSH).
STEP 3
Click
Apply
to save the values in the Running Configuration file.
Console Settings (Autobaud Rate Support)
The console port speed can be set to one of the following speeds: 4800, 9600,
19200, 38400, 57600, and 115200 or to Auto Detection.
