Cisco 350XG series, Руководство администратора

Страница: 512 / 625

Security: SSH Client
Overview
Cisco 350XG & 550XG Series 10G Stackable Managed Switches 493
23
- hmac-md5
NOTE
Compression algorithms are not supported.
Before You Begin
The following actions must be performed before using the SCP feature:
• When using the password authentication method, a username/password
must be set up on the SSH server.
• When using public/private keys authentication method, the public key must
be stored on the SSH server.
Common Tasks
This section describes some common tasks performed by the device as a SSH
client. All pages referenced are pages found under the SSH Client branch of the
menu tree.
Workflow1: To configure SSH client and transfer data to/from a remote
SSH server, perform the following steps:
STEP 1
Decide which method is to be used: password or public/private key. Use the SSH
User Authentication page.
STEP 2
If the password method was selected, perform the following steps:
a. Create a global password in the SSH User Authentication page, or create a
temporary one in the Firmware Operations or File Operations pages, when
you actually activate the secure data transfer.
b. Upgrade the firmware, boot image or language file, using SCP, by selecting the
SCP option in the Firmware Operations page. The password can be entered in
this page directly, or the password entered in the SSH User Authentication
page can be used.
c. Download/backup the configuration file, using SCP, by selecting the via SCP
(over SSH) option in the File Operations page. The password can be entered in
this page directly, or the password entered in the SSH User Authentication
page can be used.
STEP 3
Set up a username/password or modify the password on the remote SSH server.
This activity depends on the server and is not described here.