Smartport
Built-in Smartport Macros
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
210
11
•
Macro Parameters—Displays the following fields for up to three parameters
in the macro:
-
Parameter Name
—Name of parameter in macro.
-
Parameter Value
—Current value of parameter in macro. This can be
changed here.
-
Parameter Description
—Description of parameter.
STEP 3
Click
Reset
to set an interface to Default if it is in Unknown status (as a result of an
unsuccessful macro application). The macro can be reapplied on the main page.
STEP 4
Click
Apply
to update the changes and assign the Smartport type to the interface.
Built-in Smartport Macros
The following describes the pair of built-in macros for each Smartport type. For
each Smartport type there is a macro to configure the interface and an anti macro
to remove the configuration.
Macro code for the following Smartport types are provided:
•
desktop
•
printer
•
guest
•
server
•
host
•
ip_camera
•
ip_phone
•
ip_phone_desktop
•
switch
•
router
•
ap
desktop
[desktop]
