Cisco 30 VIP Скачать руководство пользователя страница 81 | Manualshive

Страница: 81 / 96

background image

Cisco IP Telephony Troubleshooting Guide for Cisco CallManager Release 3.0(1)

© 2000 Cisco Systems, Inc.

81

CDR Field Definition

The following table provides field definitions for CDRs.

Field Definitions

Field Definition
cdrRecordType

Type of this record
unsigned integer
Specifies the type of this specific record. It could be a Start
call record(0), End call record(1), or a CMR record(2).

globalCallIdentifier

Global Call Identifier
The Global Call Identifier consists of two fields which are both
unsigned integers. The values must be treated as unsigned
integers.
The two fields are
Unsigned integer GlobalCallID_CallID
Unsigned integer GlobalCallID_CallManagerID
This is the call identifier that is assigned to the entire call. All
records associated with a standard call will have the same
global call identifier.

origLegCallIdentifier

Origination leg call identifier
unsigned integer
This is a unique identifier that is used to track the origination
leg of a call. It is unique within a cluster.

dateTimeOrigination

Date/time of call origination
unsigned integer
This represents the time that the device originating the call
went off hook, or the time that an outside call was first
recognized by the system (it received the Setup message).
The value is a coordinated universal time (UTC) value, and
represents the number of seconds since Midnight (00:00:00)
Jan. 1, 1970.

origNodeId

Originator’s node ID
unsigned integer
This field represents the node within the Cisco CallManager
cluster where the call originator was registered at the time of
this call.

origSpan

Originator’s span or port
unsigned integer
This field contains the originator’s port or span number if the
call originated through a gateway. If not, this field contains
zero (0).

callingPartyNumber

Calling party number
up to 25 characters
This is the directory number of the device from which the call
originated.

origIpPort

Calling party’s IP port
unsigned integer
This field contains the IP Port of the device from which the
call originated.

origIpAddr

Calling party’s IP address
unsigned integer
This field contains the IP address of the device from which
the call originated.

«
...
79
80
81
82
83
...
»

Содержание 30 VIP

































































































Отзывы:

Нет отзывов

Похожие инструкции для 30 VIP

Бренд: Pantech Страницы: 101

Бренд: Pantech Страницы: 47

Бренд: Yealink Страницы: 3

Бренд: Sony Ericsson Страницы: 74

Бренд: NEC Страницы: 72

Бренд: BenQ Страницы: 97

BLACKVIEW GBV7000 Pro

Бренд: Iget Страницы: 47

Бренд: HTC Страницы: 310

Бренд: 2N Страницы: 180

Бренд: OUKITEL Страницы: 60

Бренд: Samsung Страницы: 140

Бренд: Telecom Страницы: 2

Бренд: Envic Страницы: 7

Бренд: Acer Страницы: 32

Liquid Mini E310

Бренд: Acer Страницы: 63

CloudMobile S500

Бренд: Acer Страницы: 66

Бренд: Acer Страницы: 58

Бренд: Acer Страницы: 76

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды