manualshive.com logo in svg

Cisco 2821 Series, Установка и обновления, Страница: 1 / 20

Поделиться
Скачать
Cisco 2821 Series Скачать руководство пользователя страница 1

 

Americas Headquarters:

© 2008 Cisco Systems, Inc. All rights reserved.

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Installing and Upgrading Fans in the Cisco 2821 
and Cisco 2851 Series Routers

This document describes how to install or upgrade fans inside your Cisco 2821 and Cisco 2851 series 
routers. 

This document is intended for the fan installer who is familiar with electronic circuitry and wiring 
practices and has experience as an electronic or electromechanical technician. 

Note

Use this document in conjunction with the following documents: 

•

Cisco 2800 Series Hardware Installation

 guide:

http://www.cisco.com/en/US/docs/routers/access/2800/hardware/installation/guide/hw.html

•

Cisco 2800 Series and Cisco 3800 Series Integrated Services Routers Regulatory Compliance and 
Safety Information

 document:

http://www.cisco.com/en/US/docs/routers/access/2800/hardware/rcsi/2838rcsi.html

If you have questions or need help, see the 

“Obtaining Documentation, Obtaining Support, and Security 

Guidelines” section on page 20

. 

This document contains the following sections:

•

Safety Warnings and Guidelines, page 2

•

Items in the Fan Replacement Kit, page 10

•

Required Tools and Equipment, page 10

•

Location of the Cisco 2821 and Cisco 2851 Router Fans, page 11

•

Upgrading the Cisco 2821 and Cisco 2851 Fan Unit, page 11

•

Obtaining Documentation, Obtaining Support, and Security Guidelines, page 20

.

Содержание 2821 Series





















Отзывы:

Нет отзывов