5-5
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 5 Configuring Security Solutions
Configuring RADIUS
Figure 5-1
Add AAA Client Page on CiscoSecure ACS
Step 3
In the AAA Client Hostname field, enter the name of your controller.
Step 4
In the AAA Client IP Address field, enter the IP address of your controller.
Step 5
In the Shared Secret field, enter the shared secret key to be used for authentication between the server
and the controller.
Note
The shared secret key must be the same on both the server and the controller.
Step 6
Choose
RADIUS (Cisco Aironet)
from the Authenticate Using drop-down box.
Step 7
Click
Apply
to save your changes.
Step 8
Click
Interface Configuration
on the ACS main page.
Step 9
Click
RADIUS (Cisco Aironet)
. The RADIUS (Cisco Aironet) page appears.
Step 10
Under User Group, check the
Cisco-Aironet-Session-Timeout
check box.
Step 11
Click
Submit
to save your changes.
Step 12
Click
System Configuration
on the ACS main page.
Step 13
Click
Logging
.
Step 14
When the Logging Configuration page appears, enable all of the events that you want to be logged and
save your changes.
Step 15
Click
Group Setup
on the ACS main page.
