3-54
Cisco Aironet 1552 Series for Hazardous Locations Installation Guide
Chapter 3 Installing the 1552 Series Access Points in Hazardous Locations
Mounting on a Wall or a Pole
Figure 3-5
Clamp Bracket Assembly Mounted on Poles Larger than 3.5 inch (8.9 cm)
Step 3
For pole diameters of 3.5 inch (8.9 cm) or less, mount the pole clamp bracket assembly to a pole using
two metal straps looped through the space between the pole clamp bracket and the strap brackets (see
) to provide maximum holding strength for extreme environments. Following the instructions
provided with the banding strap tool (BAND IT) (AIR-BAND-INST-TL=), loop each metal strap twice.
1
Pole clamp bracket
3
Metal mounting strap
2
Strap slot in strap bracket
4
Pole
1
2
3
2
3
4
2
3
141
8
Содержание 1552 Series
