Cisco MERAKI MR36H Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 20

Cisco MERAKI MR36H Скачать руководство пользователя страница 1

MR36H Installation Guide

The Cisco Meraki MR36H is a dual-band 802.11ax cloud-managed access point with integrated Ethernet ports. Designed for room wireless and wired
connectivity, the MR36H is easy to install on the wall on a single gang box, and is the first cloud managed hospitality AP.

About this Guide

This guide provides instructions on how to install and configure your MR36H access points. This guide also provides mounting instructions and limited
troubleshooting procedures. For more wireless installation guides, refer to the

wireless installation guides section

on our documentation website.

Product Overview

Physical Specifications

MR36H

Interfaces

• 1x Gigabit Ethernet (RJ45) with 802.3af Power over Ethernet output *

• 2x Gigabit Ethernet (RJ45) outputs

• 1 to 1 Passthrough port

*it can work with 802.3af with lower capabilities

Power

• Power over Ethernet: 37 - 57 (802.3at compatible)

• Power consumption: 25W max (802.3at)

• Power over Ethernet injector sold separately

Environment

1

1
2
3
...
»

Содержание MR36H





















Отзывы:

Нет отзывов