CIS WAP XL, Руководство пользователя

Страница: 7 / 29

7
Ceiling Mount
1. Drill two 4.5-5mm holes for the screws.
2. Drill a hole for the ethernet cable.
3. Attach the metal plate on the other side of
the ceiling panel.
4. Align the access point mount with the screw
holes.
5. Use the screws to tighten the mount to the
plate.
1. Thread the ethernet cable through the hole
in the metal plate.
2. Insert the ethernet cable to Ether1 of the
access point.
3. Position the access point ahead of the
mount.
Slide the access point towards the mount until it snaps into place.