CIS WAP XL, Руководство пользователя

Страница: 5 / 29

5
Device Details
Ports
•
ETHER1 (PoE in) – connect to your router or switch. Accepts passive and 802.3af/at PoE.
•
ETHER2 – connect to another access point or device.
o
Can pass-through up to 57V passive PoE.
LED Indicators
•
USR (Top) – Flashes when the access point is about to be reset.
•
5G – Indicates activity on the 5 GHz interface
•
2G – Indicates activity on the 2.4 GHz interface
•
E2 – Lights up when Ethernet 2 is connected. Indicates activity.
•
E1 – Lights up when Ethernet 1 is connected. Indicates activity.
•
PoE – Lights up when PoE is passed-through on Ether2.
•
Power (bottom) – Lights up when the access point is powered.
Buttons
•
Center button: Press to enable and disable the LEDs on the access point.
•
Mode button (back) – Also enables and disables the LEDs on the access point.
•
Reset button: Hold this button while the device is powered off, then apply power. Keeping
holding until the USR LED light starts flashing, (5 seconds) then release the button to reset to the
default CIS configuration. You can use this procedure if you have forgotten the password to
access the device, or simply wish to return the unit to its default configuration state.