VCC-F60FV19GE
Rev.900-666-32-00
©2010 CIS Corporation. All rights reserved.
4
2ch output, separated into right and left, CCD is utilized for VCC-F60FV19GE. Image signals for
right half screen and left half screen are output via each independent circuit. Therefore, differences
between right screen and left screen could be seen depending on the usage conditions (shooting
conditions /temeperature conditions and so on). CIS trys its best to adjust this differences but please
be noted it would not be perfect.
In case of abnormal operation, contact the distributor from whom you purchased the product.
3. Product Outline
VCC-F60FV19GE is a Gigabit Ethernet interfaced, high-resolution industrial color (RAW) video camera module
utilizing a 2/3 type PS IT CCD. 5M pixels CCD image sensor with on-chip micro-lenses realizes high
sensitivity and high resolution. At Full Frame Scan Mode, entire pixels can be read out within approx. 1/15s.
Features
□
High speed communication, maximum 108MB/s. (Comform to 1000BASE-T)
□
The maximum transmission distance is approx. 100m with cable more than CAT5e.
□
Camera settings can be set via LAN.
□
Software trigger input via LAN or hardware trigger input via 12pin connector at rear is selectable.
□
Shutter speed can be set from 1/15sec
～
1/30,000sec by 1H.
□
At partial scan mode, both capturing start position and capturing width can be set by 3H.
Bundled Items
□
Camera
□
iPORT Software Development Kit 2.4.1 build 921.
※
□
Gig-E Camera Control Software (CamCtlSetup.exe)
※
□
Start up manual
※
Please ask for the details or download it from our web.
10
40
20
30
50
10
11
12
[V
]
Voltage Rising Time [ ms]
9
8
7
60
70
P
ow
er
S
up
pl
y
V
ol
ta
ge