
VCC-F32U29CL
Rev.
900-513-31-01
©2007 CIS Corporation. All rights reserved.
22
Remote controller address
Note; Do not save the data into the address other than specified, since it may cause the
damages or malfunction of the camera.
Remote controller data
Set the decimal number (000
~
255) for the remote controller data. Please be noted to set any
dummy data in read control mode.
CR
Be sure to input “CR” to confirm the end of the command.
(3) Setting Example
Set Gain to +6dB with remote control function.
Step 1
Set the camera to “000000”(assign the common camera number).
Write “1” into address “000” to set the camera into remote control mode.
Please be noted that the camera control switch becomes invalid in remote control mode.
Code from the PC: “000000W000001CR”
Step 2
Set Gain to +6dB.
Code from the PC: “000000W001002CR”
8. Safety/Quality Standards
・
UL Standard
Conform to UL Standard including materials and others.
・
CE Marking
Conform to EN50081-2
(
Emission
)
Conform to EN50082-2
(
Immunity
)
・
RoHS
Conform to RoHS.
・
FCC Compliance Conform to FCC Class A Digital Device
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.