VCC-5CL4M
Rev.905-0060-04
©2016 CIS Corporation. All rights reserved.
24
8.
Partial Scan Mode
□
Maximum 8 partial areas can be set by serial commands.
Example : 3 partial areas to be set.
Partial Scan Start Position 1
④
Partial Scan Start Position 3
③
Partial Scan Effective Lines 2
Partial Scan Start Position 2
②
Partial Scan Effective Lines 3
0
2047
FVAL
LVAL
①
⑤
②
③
④
Video Out
Partial Scan Effective Lines 1
④
③
Partial Scan Effective Lines 2
②
Partial Scan Effective Lines 3
Partial Scan Effective Lines 1
Partial Scan Setting
Sequence of Video Output
①
:
Partial area 1
②
:
Partial area 2
③
:
Partial area 3
□
When setting several partial scan areas, please set the start position and effective lines trying not to overlap the
areas.
□
When setting several areas, please set the areas in the numerical order of the start position.
□
Total line count per frame = V blanking lines +
Partial effective lines 1 + Partial effective lines 2 +
・・・
+ Partial effective lines 8
Note that Sum total of partial effective line numbers from 1~8 (except V blanking lines) has to be less than 2048.
V blanking lines at partial mode is 46H.
