VCC-2CXP6M
Rev.905-0186-02
©2019 CIS Corporation. All rights reserved.
19
5.17.
Partial Scan (ROI)
□
This is to increase its frame rate by cutting out and reducing the read out area.
□
This function cannot be used with 2×2 Binning mode.
□
It shall be Idle output in case the RegionMode of Region 1~8 is all off.
□
Max. 8 partial areas can be set.
ImageFormatControl
RegionSelector
EffectiveRegion, Region1~8
RegionMode
On/Off
RegionDestination
Stream0
Width
1632
Height
8~1248 (Multiples of 8)
OffsetX
0
OffsetY
0~1240 (Multiples of 8)
・
RegionSelector: This is to select the region to be set.
8 partial areas can be set with Region1~8.
Width and Height of the effective partial area can be checked by selecting EffectiveRegion.
※Please do select EffectiveRegion to start acquiring images.
※Please do select EffectiveRegion when selecting 2×2 binning mode.
・
RegionMode: This is to set valid/invalid of selected Region.
Valid can be set to each Region with Region1~8. Effective Region can be checked by
EffectiveRegion.
※This function cannot be turned ON in case Width, Height, OffsetX, and OffsetY are not set to
effective settings.
・
RegionDestination: This is to select the Stream to be output. This model VCC-2CXP6M is fixed to Stream0.
・
Width: This is to set the width of Region. This model VCC-2CXP6M is fixed to 1632.
・
Height: This is to set the height of Region.
※Please make sure that the Height setting does not overlap with other Regions correspond to
OffsetY setting.
・
OffsetX: This is to set the Offset settings for X direction of the Region. This model VCC-2CXP6M is
fixed to 0.
・
OffsetY: This is to set the Offset settings for Y direction of the Region.
※Please make sure that the OffsetY setting does not overlap with other Region correspond to
Height setting.
