Cirrus Research CK:199L, Руководство пользователя

Страница: 15 / 32

CK:199L Trojan LITE Noise Nuisance Recorder User Manual Guide Page 15
Downloading data to the NoiseTools software
The noise measurements and audio recordings are downloaded directly from the
instrument into the NoiseTools software. This program allows measurements to be
viewed and audio recordings replayed as well as reports created and analysis of the
information to be made.
This section gives a brief overview of the software and the process to download, display
and view measurements, as well as how to listen to an audio recording.
Connecting to a PC
Data is downloaded from the sound level meter via a USB cable which is fitted to the
unit. A USB cable is fitted to the Trojan
LITE to allow data to be downloaded without
removing the instrument from the case.
The NoiseTools software should be installed and running before connecting the
Trojan
LITE to the PC.
Connect the free end of the USB cable to a USB socket on the PC. The instrument will
switch on and the NoiseTools software will detect the instrument ready for download.
Downloading measurements
To start the download process, click the download button as shown below.
Selecting measurements
The download window will open and the list of measurements currently stored in the
instrument will be shown as below.