Circutor Wibeee Max, Инструкция по эксплуатации

Страница: 36 / 48

36
Wibeee Max
Instruction Manual
Table 12 (Cont�): Variables table
Variable Description Units
<var>pac2</var> Active Power L2 W
<var>pac3</var> Active Power L3 W
<var>pact</var> Total Active Power W
<var>preac1</var> L1 Reactive Power Var
<var>preac2</var> L2 Reactive Power Var
<var>preac3</var> L3 Reactive Power Var
<var>preact</var> Total Reactive Power Var
<var>freq1</var> Frequency L1 Hz
<var>freq2</var> Frequency L2 Hz
<var>freq3</var> Frequency L3 Hz
<var>freqt</var> Total frequency (average of L1, L2, L3) Hz
<var>fpot1</var> Power Factor L1 -
<var>fpot2</var> Power Factor L2 -
<var>fpot3</var> Power Factor L3 -
<var>fpott</var> Total Power Factor -
<var>eac1</var> Active Energy L1 Wh
<var>eac2</var> Active Energy L2 Wh
<var>eac3</var> Active Energy L3 Wh
<var>eactt</var> Total Active Energy Wh
<var>ereactl1</var> Inductive Reactive Energy L1 VArLh
<var>ereactl2</var> Inductive Reactive Energy L2 VArLh
<var>ereactl3</var> Inductive Reactive Energy L3 VArLh
<var>ereactlt</var> Total Inductive Reactive Energy VArLh
<var>ereactc1</var> Capacitive Reactive Energy L1 VArCh
<var>ereactc2</var> Capacitive Reactive Energy L2 VArCh
<var>ereactc3</var>
Capacitive Reactive Energy L3 VArCh
<var>ereactct</var>
Total Capacitive Reactive Energy VArCh
5�4�2�- CONFIGURATION
The minimum requests for configuring the Wibeee Max with HPPT are:
1�-
Device Network Configuration:
http://ip_address/config_value?name=WIBEEE&dhcp=false&ip=c0a80196&gw=-
c0a80101&subnet=ffff0000&id=0.5973659041337669
Table 13: Configuration HPPT variables (Request 1)
Variable Description
name Name of the Wibeee
dhcp
false : static network
true : dynamic network
ip IP address in hexadecimal