Circutor Wibeee Max, Инструкция по эксплуатации

Страница: 35 / 48

35
Instruction Manual
Wibeee Max
Figure 34:HPPT queries: Values of the device's variables�
Table 12: Variables table�
Variable Description Units
<var>measuresRefresh</var> Measures refresh time of the internal web Seconds
<var>appRefresh</var> Time sending data to the server. Minutes
<var>softVersion</var> Firmware version of the device -
<var>model</var> Model identifier -
<var>ipAddr</var> Type of IP : DHCP or static IP -
<var>gwAddr</var> The device's current IP. -
<var>subnetMask</var> Gateway. -
<var>primaryDNS</var> Primary DNS server. -
<var>secondaryDNS</var> Secondary DNS server. -
<var>macAddr</var> MAC identifier -
<var>ssid</var> Name of the network. -
<var>keyEnc</var> Password type. -
<var>keyType</var> Password format: Hex or ASCII -
<var>securKey</var> Password. -
<var>serverIp</var> Name of the server domain. -
<var>serverIpResolved</var> IP address of the server. -
<var>serverPort</var> Sending port. -
<var>vrms1</var> Phase voltage L1 V
<var>vrms2</var> Phase voltage L2 V
<var>vrms3</var> Phase voltage L3 V
<var>vrmst</var> Total voltage (average of L1, L2, L3) V
<var>irms1</var> Current L1 A
<var>irms2</var> Current L2 A
<var>irms3</var> Current L3 A
<var>irmst</var> Total current (average of L1, L2, L3) A
<var>pap1</var> Apparent Power L1 VA
<var>pap2</var> Apparent Power L2 VA
<var>pap3</var> Apparent Power L3 VA
<var>papt</var> Total Apparent Power VA
<var>pac1</var> Active Power L1 W