Circutor RECmax-CVM 2-pole, Инструкция по эксплуатации, Страница: 41 / 68

41
Instruction Manual
RECmax-CVM
Table 20 (Cont�): Available sequences (SDR)�
SDR: Available sequences
DI NR ST TR
DI 6 7 30s, 1, 2, 3, 4, 8 and 16 min� 30 min�
DI 7 10 1 min� 30 min�
DI 8 10 90 s� 30 min�
DI 9 8 2, 4 and 6 min� the rest 15 min�
DI 10 10 3 min� 30 min�
DI 11 7 2, 4, 8, 16 and 32 min� the rest 15 min�
DI 12 31 2, 4 and 6 min� the rest 60 min�
DI 13 3 2, 4 and 8 min� 15 min�
DI 14 Free space for personalising the customer�
Press the PROG key to save the selected sequence and exit the setup menu; when exiting, the screen
in
Figure 32
is displayed for a few seconds�
If you do not press any key for 10 s, the screen shown in
Figure 31
appears and the device opens the
Delay and Sensitivity
screen, without saving the changes made�
Default value: DI 10
6�2�2�- SRM: CIRCUIT BREAKER RECLOSING SEQUENCE
The reclosing parameters are configured on this screen after a circuit breaker trip�
PROG
PROG
PROG
Press the
RESET
key to move between the different sequences available (
MA
)�
Each sequence determines the maximum no� of reclosing attempts ( NR ), the timer ( ST ) and the reset
time of the partial meter (
TR
)�
Table 21
shows the different sequences�
Table 21: Available sequences (SRM)�
SRM: Available sequences
MA NR ST TR
MA 0 Automatic reclosing is disabled by circuit breaker
MA 1 2 1 min� 30 min�
MA 2 2 1 min� 60 min�
MA 3 2 90 s 30 min�
MA 4 2 90 s 60 min�
MA 5 2 3 min� 30 min�
MA 6 2 30 s 30 min�
MA 7 6 30 s 30 min�
MA 8 Free space for personalising the customer�