Circutor ReadWatt, Инструкция по эксплуатации

Страница: 6 / 24

1.- VERIFICATION UPON RECEPTION
Check the following points when you receive the device:
a) The device meets the specifications described in your order.
b) The device has not suffered any damage during transport.
c) Perform an external visual inspection of the device prior to switching it on.
d) Check that it has been delivered with the following:
- A Velcro strap to attach the device to the energy meter with impulse emitter,
- A connection cable,
- An installation guide.
If any problem is noticed upon reception, immediately contact the transport com-
pany and/or CIRCUTOR's after-sales service.
2.- PRODUCT DESCRIPTION
ReadWatt
is an impulse sensor that can be attached to an energy meter verification impulse emitter
so that, through a MODBUS RTU protocol, there is an energy totaliser with the same accuracy as the
meter itself, but without physical access being necessary.
The unit features:
- 1 impulse indicator LED .
- 1 impulse output.
- RS-232 communications with MODBUS RTU protocol.
- RS-485 communications with
MODBUS
RTU protocol.
6
ReadWatt
Instruction Manual