Circutor RAPTION 150C CCS CHA, Инструкция по эксплуатации

Страница: 8 / 120

Raption 150C
Instruction Manual 8
2
A
Main features
• HMI:
there is a TFT colour touch screen of 8 inches which is the interface between the
Charge Point and the user. Provides information about every step of the charge transaction.
Also includes the detail of the in progress charge transactions (SoC, charging time remaining,
etc).
• RFID:
there is a radio frequency reader that allows user authentication to proceed with the
recharging of the electric vehicle. At the discretion of the facility operator, the user’s recharge
also can be allowed or denied.
• User Management:
provides a database that associates users with one or more identification
cards, you can also assign consumption and charging logs.
• Beacons light:
by a LED beacons located above connectors, it is indicated the charging
status of the socket/connector.
• Ethernet:
the unit allows communicate using TCP / IP on an Ethernet network, giving
flexibility to the system operator and management of the Charge Point.
• Remote monitoring and control in real-time 4G:
it can be done via
CIRCUTOR
software
and also via OCPP integrations through the integrated router. In addition, by using a standard
Web browser, you can access to the Charge Point and adjust the settings remotely.
• Historic charge transactions:
the system is able to generate charging process reports,
according to the historical database of the Charge Point.
• Energy metering:
two integrated meters are measuring power and energy consumed by
the EV during a charge session. Both meters are MID certified.
• OCPP integration:
OCPP is a communication protocol between the Charge Point and
management platforms (BackOffice) for comprehensive management of charging. This
integration allows, among other things, management and user authentication as well as a
variety of parameters to monitor during a charge transaction’.