Configuration values
Table 32:Configuration values: Selecting the screens�
Selecting the screens
Possible values
Yes,
to display the screen in the user menu.
No,
to stop displaying the screen.
Press key
to access the next programming step.
This programming step is repeated for each one of the 19 screens of the device.
6�15�-
BACKLIGHT, TURNING ON THE BACKLIT DISPLAY
The time that the Backlight will stay lit (in seconds) is programmed on this screen after the last
keystroke on the device.
Press key
for 3 seconds to edit the value. The
icon appears at the top of the screen.
To enter or modify the value, press the
key repeatedly, increasing the value of the flashing digit.
When the desired value is shown on the screen, move onto the next digit by pressing the key
to
modify the other values.
To validate the data, press
for 3 seconds and the
icon will disappear from the display.
The programmed value will be deleted if the entered value is higher than the maximum programming
value.
Configuration values
Table 33:Configuration values: Backlight�
Backlight
Minimum value
0 seconds.
Maximum value
99 seconds.
Note:
The value
00
indicates that the backlight will stay permanently lit.
Press key
to access the next programming step.
49
Instruction Manual
CVM-C11
Содержание CVM-C11
