6�2�-
SECONDARY VOLTAGE
On this screen the voltage transformer secondary is programmed.
Press key
for 3 seconds to edit the value. The
icon appears at the top of the screen.
To enter or modify the value, press the
key repeatedly, increasing the value of the flashing digit.
When the desired value is shown on the screen, move onto the next digit by pressing the key
to
modify the other values.
To validate the data, press
for 3 seconds and the
icon will disappear from the display.
The programmed value will be deleted if the entered value is higher than the maximum programming
value.
Configuration values
Table 18:Configuration values: Secondary voltage�
Secondary voltage
Minimum value
1
Maximum value
999
Press key
to access the next programming step.
6�3�-
PRIMARY CURRENT
The current transformer primary is programmed on this screen.
Press key
for 3 seconds to edit the value. The
icon appears at the top of the screen.
To enter or modify the value, press the
key repeatedly, increasing the value of the flashing digit.
39
Instruction Manual
CVM-C11
Содержание CVM-C11
